This spillproof kit connects a 25mm grey waste hose to your external waste tank by side entry. This reduces the height required for the hose into the waste tank. Mounted 50 to 75mm maximum, from top of tank on side or end of tank.
The hose connector fits snuggly inside the tank connector when fitted as per the phots. When removed the screw caps ensure no accidental spillage when emptying.
To fit a 32mm hole needs to be drilled into the waste container body. (These drills - spade bit or holesaw - are available from any hardware store) The screw in thread should be a very tight fit with plumbers tape or silicone used to seal.
A cap is included to seal you waste water evacution hose when not connected to the tank.
The kit comes with
Threaded fitting to tank with cap
Threaded hose connector with cap.
1 metre of 25mm waste hose is available separately for $8.40
Do you need the connection fitting to the caravan / campervan or the vehicle watse outlet kit? Check out our other listings.
top of page
bottom of page